V2 is now here.

Updates- More aggressive corners and the first louver pivots at the leading edge which helps with the pressure differential.

Keisler Automation RX8 hood louvers were originally designed to be used in conjunction with the Totality Track Package. The Track package places the radiator assembly at an aggressive 36 degree AOA thus allowing the hood louvers to efficiently duct the compromised air out of the hood while reducing the pressure differential.

• Universal design. Place them on any car you so choose

• 5052-H32 Aluminum 1.5mm thick

•Brushed Finish

•Supplied 3/16 rivets

Installation-

1. Position the flat hood louvers.

2. Drill thru holes with 3/16 drill bit.

3. Remove hood.

4. Cut the under hood structure to your desired opening using the drilled holes as judgement.

5. Cut upper hood 1/4" inward from the drilled holes.

6. Use Needle nose pliers to bend louvers to your desired angle.

7. Paint or powder coat louvers if you so choose.

8. Install hood louvers with supplied rivets.

9. Reinstall hood.

10. Go racin'.