• Universal design. Place them on any car you so choose

• The first louver pivots at the leading edge which helps with the pressure differential.

• 5052-H32 Aluminum 1.5mm thick

•Brushed Finish

•Supplied 3/16 rivets

Installation-

1. Position the flat fender louvers.

2. Drill thru holes with 3/16 drill bit.

3. Cut 1/4" inward from the drilled holes.

4. Use Needle nose pliers to bend louvers to your desired angle.

5. Paint or powder coat louvers if you so choose.

6. Install hood louvers with supplied rivets.

7. Go racin'.